Skip to main content

Cables For Dimetix Lasers

Individual Cables For Connecting to a Dimetix Laser

via Ethernet IP, Profinet, or Ethercat

Part # 001095-05
Data Option #1
  • Part # 001095-05
  • M12 D coded male Ethernet cable to RJ45. 5m.
Part # 001094-05
Data Option #2
  • Part # 001094-05
  • M12 D coded male to male. 5m.
Part # LV77-3430-0000-50005-0500
Power (Required)
  • Part # LV77-3430-0000-50005-0500
  • M12 A coded female power cable to free leads. 5m.
  • Dimetix laser is not POE compatible

Combination Data and Power Cables For Connecting to a Dimetix Laser

via Ethernet IP, Profinet, or Ethercat

This method is usable if you wish to run only 1 cable over a long run

Part # 000952-15
Data & Power #1 (Required)
  • Part # 000952-15
  • M12 8-pin Male Y cable to M12 4-pin D coded (Ethernet) + M12 4-pin A coded (power)
Part # 000953-6
Data & Power #2 (Required)
  • Part # 000953-6
  • M12 8-pin Female to RJ45 (Ethernet) + free power leads
Part # 000957-10
Extension Cable #1 (Optional)
  • Part # 000957-10
  • M12 8-pin M-F TP Ethernet cable. 10m.
Part # 000957-30
Extension Cable #2 (Optional)
  • Part # 000957-30
  • M12 8-pin M-F TP Ethernet cable. 30m.

Connecting to a Dimetix Laser via Serial, Analog, Digital I/O

Part # LV77-3430-0000-50005-0500
Method #1
  • Part # LV77-3430-0000-50005-0500
  • M12 5-pin A coded female power cable to free leads. 5m.
Laser with Bulkhead and Part # 000934 and
Method #2
  • Part # 000934
  • Bulkhead connector, M12 barrel 5-pin male to pigtail connection, 22 AWG, 0.5m cable length, polypropylene conductor insulation material. Mounting nut(s) included.