Dimetix Laser Accessories

Accessories for Dimetix lasers are offered by Laser-View Technologies

Protective Enclosures for Harsh Conditions

Explosion Proof Laser Enclosure

Air Cooled Jacket

  • Stainless Steel NEMA 4X windowed enclosures with optional cooling and heating
  • Manufactured by Laser-View Technologies

Download Data Sheet

  • Classified ATEX, CSA, UL, NE Cl1Div1 and Cl1Div2 rated enclosures for hazardous areas
  • Manufactured by Laser-View Technologies

Download Data Sheet

  • The Dimetix Air Cooling Jacket protects the laser sensor and cools it with air.
  • 2 models available
  • Air cooling jacket for D-series sensors with standard interface: This jacket can be used with all Dimetix D-Series laser sensors that are equipped with standard interfaces.
  • Air cooling jacket for D-series sensors with Industrial Ethernet: This jacket can be used with the Dimetix D-series sensors that are equipped with the sensor extensions PROFITNET, Ethernet/IP, or EtherCAT.

Adjustable Mounting Bracket

L-Bracket

Alignment Bracket

  • Part # 000812-02
  • Applicable for all D-Series Lasers
  • Ideal for harsh environments, such as steel mills and atop cranes
  • Allows for dual-axis alignment
  • Ability to pivot a full 90° for wall mounting
  • 300-Series Stainless Steel, 2.5mm thick
  • Manufactured by Laser-View Technologies

Download Data Sheet

  • Part # 000968-02
  • Applicable for all D-Series Lasers
  • Allows for dual-axis alignments
  • 300-Series Stainless Steel, 1.5mm thick
  • Manufactured by Laser-View Technologies

Download Data Sheet

  • Part # 500308
  • Applicable for all D-Series Lasers
  • Steel, zinc-plated
  • Allows for dual-axis alignment +/-4°; planar adjustment permits dual-axis adjustment simultaneously via spring tensioned adjustment bolts

Download Data Sheet

Orange Reflective Foil 600x1200mm
Orange Reflective Plate 24x24in
White Plate 24x24in

Orange Reflective Foil 600x1200mm

Orange Reflective Plate 24x24in

White Plate 24x24in

The reflective foil provides a defined, highly-reflecting measuring target. It improves the reflected signal strength. This improved signal strength is used by the Dimetix D-Series non-contact laser sensor to measure long-distance ranges. Please check Dimetix D-Series Laser specifications.

The reflective aluminum target plate provides a defined measuring target. It improves the reflected signal strength. This improved signal strength is used by the Dimetix D-Series non-contact laser sensor to measure long-distance ranges. Please check Dimetix D-Series Laser specifications.

The white matte aluminum target plate provides a defined measuring target and improved natural reading surface for your Dimetix D-Series Laser.

Displays
Controllers
45° Dimetix Laser Mirror Assembly (Part # 001437)

Displays

Controllers

45° Laser Mirror Assembly

  • Serial ASCII panel displays
  • Process controllers for monitoring diameter, width and length without any external PLC programming

Download Data Sheet

  • Part # 001437
  • Applicable for all D-Series Lasers
  • Aluminum Construction
  • Allows for laser measurement at 90° by attaching to Dimetix Laser Alignment Bracket (Part # 500308)
  • Manufactured by Laser-View Technologies

Individual Cables For Connecting to a Dimetix Laser via Ethernet IP, Profinet, or Ethercat

Part # 001095-05
Part # 001094-05
Part # LV77-3430-0000-50005-0500

Data Option #1

  • M12 D coded male Ethernet cable to RJ45. 5m.
  • Part # 001095-05

Data Option #2

  • M12 D coded male to male. 5m.
  • Part # 001094-05

Power (Required)

  • M12 A coded female power cable to free leads. 5m.
  • Part # LV77-3430-0000-50005-0500
  • Dimetix laser is not POE compatible

Combination Data and Power Cables For Connecting to a Dimetix Laser via Ethernet IP, Profinet, or Ethercat
This method is usable if you wish to run only 1 cable over a long run

Part # 000952-15
Part # 000953-6
Part # 000957-10
Part # 000957-30

Data & Power #1 (Required)

  • M12 8-pin Male Y cable to M12 4-pin D coded (Ethernet) + M12 4-pin A coded (power)
  • Part # 000952-15

Data & Power #2 (Required)

  • M12 8-pin Female to RJ45 (Ethernet) + free power leads
  • Part # 000953-6

Extension Cable #1 (Optional)

  • M12 8-pin M-F TP Ethernet cable. 10m.
  • Part # 000957-10

Extension Cable #2 (Optional)

  • M12 8-pin M-F TP Ethernet cable. 30m.
  • Part # 000957-30

Connecting to a Dimetix Laser via Serial, Analog, Digital I/O

Part # LV77-3430-0000-50005-0500
Laser with Bulkhead and Part # 000934 and

Method #1

  • M12 5-pin A coded female power cable to free leads. 5m.
  • Part # LV77-3430-0000-50005-0500

Method #2

  • Bulkhead connector, M12 barrel 5-pin male to pigtail connection, 22 AWG, 0.5m cable length, polypropylene conductor insulation material. Mounting nut(s) included.
  • Part # 000934

Dimetix D-Series Laser Distance Sensor Accessories Display